Индикация на двух семи сегментных двух знаковых светодиодных индикаторах через SPI

Материал из Automata.

(Различия между версиями)
Перейти к: навигация, поиск
м (Полностью удалено содержимое страницы)
(Отмена правки № 1786 участника Kern (обсуждение))
 
Строка 1: Строка 1:
 +
#include <stdint.h>
 +
#include <avr/io.h>
 +
#include <avr/interrupt.h>
 +
//MISO - RCK;
 +
#define LATCH 0x40
 +
 +
/*0*/ /*1*/ /*2*/ /*3*/ /*4*/ /*5*/ /*6*/ /*7*/ /*8*/ /*9*/ /*.*/
 +
static const uint8_t LEDS[11] = { 0x03, 0x9F, 0x25, 0x0D, 0x99, 0x49, 0x41, 0x1F, 0x01, 0x09, 0xFE };
 +
static volatile uint8_t counts[4];
 +
static volatile uint16_t data = 0;
 +
 +
void Indicate(uint16_t data)
 +
{
 +
counts[3] = data % 10;
 +
data /= 10;
 +
counts[2] = data % 10;
 +
data /= 10;
 +
counts[1] = data % 10;
 +
data /= 10;
 +
counts[0] = data % 10;
 +
data /= 10;
 +
 +
SPCR |= _BV(SPE);
 +
 +
register uint8_t j;
 +
for (j = 0; j < 4; j++)
 +
{
 +
SPDR = ( j == 1 ) ? ( LEDS[counts[j]] & LEDS[10] ) : ( LEDS[counts[j]] );
 +
while (!(SPSR & _BV(SPIF)));
 +
}
 +
 +
SPCR &= ~_BV(SPE);
 +
 +
PORTB |= LATCH;
 +
PORTB &= ~LATCH;
 +
}
 +
 +
 +
ISR (TIMER0_COMP_vect)
 +
{
 +
if (data == 10000)
 +
data = 0;
 +
 +
Indicate(data++);
 +
}
 +
 +
int main (void)
 +
{
 +
DDRB = 0xff;
 +
PORTB = 0x00;
 +
 +
SPCR = _BV(SPE) | _BV(MSTR) | _BV(SPR1);
 +
 +
TCCR0 = _BV(WGM01) | _BV(CS02) | _BV(CS00);
 +
TIMSK = _BV(OCIE0);
 +
OCR0 = 78;
 +
//78'''.125''' t = 0.01 s * 8/1024 MHz;
 +
 +
 +
sei();
 +
 +
while (1);
 +
}

Текущая версия

#include <stdint.h>                 
#include <avr/io.h>                 
#include <avr/interrupt.h>          

//MISO - RCK;
#define LATCH 0x40

                                  /*0*/ /*1*/ /*2*/ /*3*/ /*4*/ /*5*/ /*6*/ /*7*/ /*8*/ /*9*/ /*.*/
static const uint8_t LEDS[11] = { 0x03, 0x9F, 0x25, 0x0D, 0x99, 0x49, 0x41, 0x1F, 0x01, 0x09, 0xFE };
static volatile uint8_t counts[4];                                                                   
static volatile uint16_t data = 0;                                                                   

void Indicate(uint16_t data)
{                           
   counts[3] = data % 10;  
   data /= 10;             
   counts[2] = data % 10;  
   data /= 10;             
   counts[1] = data % 10;  
   data /= 10;             
   counts[0] = data % 10;  
   data /= 10;
   
   SPCR |= _BV(SPE);
   
   register uint8_t j;
   for (j = 0; j < 4; j++)
   {
       SPDR = ( j == 1 ) ? ( LEDS[counts[j]] & LEDS[10] ) : ( LEDS[counts[j]] );
       while (!(SPSR & _BV(SPIF)));
   }
   
   SPCR &= ~_BV(SPE);
   
   PORTB |= LATCH;
   PORTB &= ~LATCH;
}



ISR (TIMER0_COMP_vect)
{
   if  (data == 10000)
       data = 0;
   
   Indicate(data++);
}

int main (void)
{
   DDRB  = 0xff;
   PORTB = 0x00;
   
   SPCR  = _BV(SPE) | _BV(MSTR) | _BV(SPR1);
   
   TCCR0 = _BV(WGM01) | _BV(CS02) | _BV(CS00);
   TIMSK = _BV(OCIE0);
   OCR0  = 78;
   //78.125 t = 0.01 s * 8/1024 MHz;
   
   
   sei();
   
   while (1);
}
Получено с http://automata.sgu.ru/wiki/%C3%90%CB%9C%C3%90%C2%BD%C3%90%C2%B4%C3%90%C2%B8%C3%90%C2%BA%C3%90%C2%B0%C3%91%E2%80%A0%C3%90%C2%B8%C3%91%C2%8F_%C3%90%C2%BD%C3%90%C2%B0_%C3%90%C2%B4%C3%90%C2%B2%C3%91%C6%92%C3%91%E2%80%A6_%C3%91%C2%81%C3%90%C2%B5%C3%90%C2%BC%C3%90%C2%B8_%C3%91%C2%81%C3%90%C2%B5%C3%90%C2%B3%C3%90%C2%BC%C3%90%C2%B5%C3%90%C2%BD%C3%91%E2%80%9A%C3%90%C2%BD%C3%91%E2%80%B9%C3%91%E2%80%A6_%C3%90%C2%B4%C3%90%C2%B2%C3%91%C6%92%C3%91%E2%80%A6_%C3%90%C2%B7%C3%90%C2%BD%C3%90%C2%B0%C3%90%C2%BA%C3%90%C2%BE%C3%90%C2%B2%C3%91%E2%80%B9%C3%91%E2%80%A6_%C3%91%C2%81%C3%90%C2%B2%C3%90%C2%B5%C3%91%E2%80%9A%C3%90%C2%BE%C3%90%C2%B4%C3%90%C2%B8%C3%90%C2%BE%C3%90%C2%B4%C3%90%C2%BD%C3%91%E2%80%B9%C3%91%E2%80%A6_%C3%90%C2%B8%C3%90%C2%BD%C3%90%C2%B4%C3%90%C2%B8%C3%90%C2%BA%C3%90%C2%B0%C3%91%E2%80%9A%C3%90%C2%BE%C3%91%E2%82%AC%C3%90%C2%B0%C3%91%E2%80%A6_%C3%91%E2%80%A1%C3%90%C2%B5%C3%91%E2%82%AC%C3%90%C2%B5%C3%90%C2%B7_SPI
Личные инструменты
Микроконтроллеры