Индикация на двух семи сегментных двух знаковых светодиодных индикаторах через SPI

Материал из Automata.

(Различия между версиями)
Перейти к: навигация, поиск
м (Новая: #include <stdint.h> #include <avr/io.h> #include <avr/interrupt.h> //MISO - RCK; #define LATCH 0x40 - →0 - /...)
(Отмена правки № 1786 участника Kern (обсуждение))
 
(4 промежуточные версии не показаны)
Строка 1: Строка 1:
-
#include <stdint.h>
+
#include <stdint.h>
-
#include <avr/io.h>
+
#include <avr/io.h>
-
#include <avr/interrupt.h>
+
#include <avr/interrupt.h>
-
//MISO - RCK;
+
//MISO - RCK;
-
#define LATCH 0x40
+
#define LATCH 0x40
-
/*0*/ /*1*/ /*2*/ /*3*/ /*4*/ /*5*/ /*6*/ /*7*/ /*8*/ /*9*/ /*.*/
+
-
static const uint8_t LEDS[11] = { 0x03, 0x9F, 0x25, 0x0D, 0x99, 0x49, 0x41, 0x1F, 0x01, 0x09, 0xFE };
+
-
static volatile uint8_t counts[4];
+
-
static volatile uint16_t data = 0;
+
-
static volatile uint8_t adj = 0;
+
-
void Indicate(uint16_t data)
+
/*0*/ /*1*/ /*2*/ /*3*/ /*4*/ /*5*/ /*6*/ /*7*/ /*8*/ /*9*/ /*.*/
-
{
+
static const uint8_t LEDS[11] = { 0x03, 0x9F, 0x25, 0x0D, 0x99, 0x49, 0x41, 0x1F, 0x01, 0x09, 0xFE };
 +
static volatile uint8_t counts[4];
 +
static volatile uint16_t data = 0;
 +
 
 +
void Indicate(uint16_t data)
 +
{
counts[3] = data % 10;
counts[3] = data % 10;
data /= 10;
data /= 10;
Строка 20: Строка 20:
data /= 10;
data /= 10;
counts[0] = data % 10;
counts[0] = data % 10;
-
data /= 10;
+
data /= 10;
-
 
+
SPCR |= _BV(SPE);
SPCR |= _BV(SPE);
-
 
+
register uint8_t j;
register uint8_t j;
for (j = 0; j < 4; j++)
for (j = 0; j < 4; j++)
Строка 30: Строка 30:
while (!(SPSR & _BV(SPIF)));
while (!(SPSR & _BV(SPIF)));
}
}
-
 
+
SPCR &= ~_BV(SPE);
SPCR &= ~_BV(SPE);
-
 
+
PORTB |= LATCH;
PORTB |= LATCH;
PORTB &= ~LATCH;
PORTB &= ~LATCH;
-
}
+
}
-
ISR (TIMER0_COMP_vect)
+
 
-
{
+
ISR (TIMER0_COMP_vect)
-
if (adj++ % 9)
+
{
-
{
+
-
adj = 0;
+
-
return;
+
-
}
+
if (data == 10000)
if (data == 10000)
data = 0;
data = 0;
 +
Indicate(data++);
Indicate(data++);
-
}
+
}
-
int main (void)
+
int main (void)
-
{
+
{
DDRB = 0xff;
DDRB = 0xff;
PORTB = 0x00;
PORTB = 0x00;
-
 
+
SPCR = _BV(SPE) | _BV(MSTR) | _BV(SPR1);
SPCR = _BV(SPE) | _BV(MSTR) | _BV(SPR1);
-
 
+
TCCR0 = _BV(WGM01) | _BV(CS02) | _BV(CS00);
TCCR0 = _BV(WGM01) | _BV(CS02) | _BV(CS00);
-
OCR0 = 78; //78.125;
 
TIMSK = _BV(OCIE0);
TIMSK = _BV(OCIE0);
-
 
+
OCR0 = 78;
 +
//78'''.125''' t = 0.01 s * 8/1024 MHz;
 +
 +
sei();
sei();
-
 
+
while (1);
while (1);
-
}
+
}

Текущая версия

#include <stdint.h>                 
#include <avr/io.h>                 
#include <avr/interrupt.h>          

//MISO - RCK;
#define LATCH 0x40

                                  /*0*/ /*1*/ /*2*/ /*3*/ /*4*/ /*5*/ /*6*/ /*7*/ /*8*/ /*9*/ /*.*/
static const uint8_t LEDS[11] = { 0x03, 0x9F, 0x25, 0x0D, 0x99, 0x49, 0x41, 0x1F, 0x01, 0x09, 0xFE };
static volatile uint8_t counts[4];                                                                   
static volatile uint16_t data = 0;                                                                   

void Indicate(uint16_t data)
{                           
   counts[3] = data % 10;  
   data /= 10;             
   counts[2] = data % 10;  
   data /= 10;             
   counts[1] = data % 10;  
   data /= 10;             
   counts[0] = data % 10;  
   data /= 10;
   
   SPCR |= _BV(SPE);
   
   register uint8_t j;
   for (j = 0; j < 4; j++)
   {
       SPDR = ( j == 1 ) ? ( LEDS[counts[j]] & LEDS[10] ) : ( LEDS[counts[j]] );
       while (!(SPSR & _BV(SPIF)));
   }
   
   SPCR &= ~_BV(SPE);
   
   PORTB |= LATCH;
   PORTB &= ~LATCH;
}



ISR (TIMER0_COMP_vect)
{
   if  (data == 10000)
       data = 0;
   
   Indicate(data++);
}

int main (void)
{
   DDRB  = 0xff;
   PORTB = 0x00;
   
   SPCR  = _BV(SPE) | _BV(MSTR) | _BV(SPR1);
   
   TCCR0 = _BV(WGM01) | _BV(CS02) | _BV(CS00);
   TIMSK = _BV(OCIE0);
   OCR0  = 78;
   //78.125 t = 0.01 s * 8/1024 MHz;
   
   
   sei();
   
   while (1);
}
Получено с http://automata.sgu.ru/wiki/%C3%90%CB%9C%C3%90%C2%BD%C3%90%C2%B4%C3%90%C2%B8%C3%90%C2%BA%C3%90%C2%B0%C3%91%E2%80%A0%C3%90%C2%B8%C3%91%C2%8F_%C3%90%C2%BD%C3%90%C2%B0_%C3%90%C2%B4%C3%90%C2%B2%C3%91%C6%92%C3%91%E2%80%A6_%C3%91%C2%81%C3%90%C2%B5%C3%90%C2%BC%C3%90%C2%B8_%C3%91%C2%81%C3%90%C2%B5%C3%90%C2%B3%C3%90%C2%BC%C3%90%C2%B5%C3%90%C2%BD%C3%91%E2%80%9A%C3%90%C2%BD%C3%91%E2%80%B9%C3%91%E2%80%A6_%C3%90%C2%B4%C3%90%C2%B2%C3%91%C6%92%C3%91%E2%80%A6_%C3%90%C2%B7%C3%90%C2%BD%C3%90%C2%B0%C3%90%C2%BA%C3%90%C2%BE%C3%90%C2%B2%C3%91%E2%80%B9%C3%91%E2%80%A6_%C3%91%C2%81%C3%90%C2%B2%C3%90%C2%B5%C3%91%E2%80%9A%C3%90%C2%BE%C3%90%C2%B4%C3%90%C2%B8%C3%90%C2%BE%C3%90%C2%B4%C3%90%C2%BD%C3%91%E2%80%B9%C3%91%E2%80%A6_%C3%90%C2%B8%C3%90%C2%BD%C3%90%C2%B4%C3%90%C2%B8%C3%90%C2%BA%C3%90%C2%B0%C3%91%E2%80%9A%C3%90%C2%BE%C3%91%E2%82%AC%C3%90%C2%B0%C3%91%E2%80%A6_%C3%91%E2%80%A1%C3%90%C2%B5%C3%91%E2%82%AC%C3%90%C2%B5%C3%90%C2%B7_SPI
Личные инструменты
Микроконтроллеры